From the beginning of 2022, there will be 2.69 million construction employees in the UK, according to the CITB. As builders take on new jobs, construction sites become messy once again.
The next stage of construction is after construction cleaning. After it’s finished, the construction site will become cleaner than when it started. The area also benefits from final repair work and maintenance.
Are you cleaning after building work, and you’re unsure of what to do? So this checklist is ideal for you.
Table of Contents
1. Dispose of All Construction Waste
There are rules and regulations in place to ensure that all construction waste is disposed of in a way that won’t damage or pollute the environment. It’s wise to contact your local waste disposal facility for their requirements when it comes to disposing of construction waste. You should take the time to inspect the area to ensure that all construction waste has been completely removed from the site.
2. Vacuum Carpets
When vacuuming carpets and rugs, it is important to move the vacuum nozzle slowly and methodically, making sure to vacuum the edges and corners, as these areas are oftentimes missed. Doing so will help to ensure that all dust and dirt trapped in the fibers is removed, leaving the carpets and rugs looking bright and fresh. You may want to ask for the service of professional maids to help you do the job.
3. Sweep, Mop, and Sanitize All Floors
Remember to sweep away any dirt, dust, or other debris that may have settled on your floor during construction. Make sure to use appropriate cleaning tools to clean the floors and remove any stubborn stains.
Be sure to sanitize the floor with a safe and effective cleaning solution so that any remaining germs and bacteria are eliminated. Keep in mind that all floors should be completely dry before moving on to the next task or allowing anyone to walk on them.
4. Clean Out Air Vents and Air Ducts
It is important to remove dirt, dust, and debris from air ducts and vents room by room. This is to ensure they are free of obstructions and that air can circulate. As part of the post-construction cleaning process, technicians should clean the vents and air ducts using high-powered vacuums and air compressors, with special attention being paid to corners and tight spaces.
Fine bits of dust and debris should also be removed from electronic components and other machinery as well. Once cleaned, the technician should also check for any signs of wear or damage, which may require further repair or replacement. This can help extend the life of the air vent or air duct system and ensure its continued efficiency.
5. Wipe Down All Marble, Tile, and Stone Surfaces with a pH-neutral Cleaner
Apply the pH-neutral cleaner to the surface and use a sponge, cloth, or mop to wipe it down and thoroughly clean it. Make sure to rinse the surface too.
After any remaining cleaner is wiped away, use a dry cloth or mop to make sure the surface is completely dry. This will help prevent any future staining.
Focus on After Construction Cleaning
This is essential to ensure that the building is cleaned before it is reopened or made ready for occupancy. With a checklist in hand, it can be easier to identify and list the tasks that need to be completed to ensure the safety and comfort of the building’s occupants. Consider creating a checklist to help prepare for after construction cleaning.
Did you find this article useful? If yes, head back to our blog page to capture our latest information.
